12 Liters Precise Kneader for Powder Metallurgy
|Terms of Trade:||FOB,CFR,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||75 Days|
|Place of Origin:||China|
|Supply Ability:||50 per month|
|Certificate:||IS0:9001:2008 SGS CE|
Model No.: LN-PIM-12
LINA 12 Liters Precise Kneader for Powder Metallurgy
This type of Precise Lab Dispersion Mixing Machines for Powders is able to meet the large demand in today's powder metallurgy (PM) industry. LINA Dispersion Mixer for Ceramics and Mental Powders can clean up even very sticky materials without a dead corner; The mixing chamber and rotors can be separated completely. The surface of Powder Metallurgy (PM) Dispersion Kneader that contact directly with the materials can be mirror treated which ensures all the materials easy to be cleaned without stickiness and avoid formula lost and pollution. This model of PIM Dispersion Kneader's mixing rotors can be separated from the mixing chamber completely. For high hardness materials, tungsten carbide can be plated on the surface of rotors and mixing chamber to avoid damage of important parts. LINA 12 Liters Powders Dispersion Mixers are suitable for a wide range of CIM and MIM powder materials with different physical characteristics.
Characteristics of LINA 12 L Powder Metallurgy Dispersion Kneader
1. Higher cleanness: Clean up the material without dead corners; The mixing chamber and rotors can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.
2. Wearable inner cavity: Imported special new alloy steel and vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.
3. Adjustable rotor speed ratio: The speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency.
4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics' color difference.
5. PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code. 2. The control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. The control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface. 4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.
Specifications of LINA 12 Liters CIM Dispersion Mixer
| Item ||Specification|| |
| Mixing Capacity || 12 liters || |
| Production Yield || 9.0-16 KG per time || Subject to the proportion of material and dispersion requirements. |
| Main Motor Power ||15 KW|| |
|Maximum Separation||400 mm|| |
| Temperature Control || Heating or/and cooling || Electric/oil/steam heating and circulating water cooling. |
| Weight || About 2000 KG || |
| Standard Dimensions || |
Eco Type Dimensions
Details of LINA 12 Liters Lab Kneader for CIM
LINA After-Sales Services
1. On-site installation assistance is available. (There are no charges on installation and trial running, but VISA fees, accommodation fees and transportation fees etc, of the supplier's side are charged by the buyer.)
2. Training of customer's operators and maintenance personnel and long-term technical consultation is provided.
3. One year's non-charge warranty period is provided for units in normal operation and long-term spare parts/components are available. During the warranty period, the supplier, within three hours since receipt of purchaser's notice of any equipment fault, shall provide express solution, and if necessary, assign service engineer(s) to site across China within 72 hours or site in Pearl River Delta within 5 hours (excluding travel time). Response time for customers overseas shall be agreed upon otherwise based on application for visa and accessibility to the customer's location.
Are you factory or trading company?
LINA Machinery has been engaged in Rubber & Plastic mixing machine for many years. We have workshop and R&D department.
What about the operational guideline?
Training of customer's operator and maintenance personnel and long-term technical consultation is provided.
How about the warranty time?
One year's non-charge warranty period is provided for units in normal operation and long-term spare parts/component are available.
Do you offer the customization of the machine?
Certainly, LINA will give you the most proper recommendation and setting according to your materials and demand.
LINA Machinery Industrial Co.,Ltd
Guangdong LINA Industrial Co., Ltd. has more than 10 years of experience in R&D of rubber and plastic industry chain, and we are leading the industry in terms of technology, quality and service.For instant,Toyota, Nike and Bridgestone are our customers and cooperative partners.
We are good at designing "turkey projects", including intellectualized system,energy-saving automation environmental protection and security, such as new production line of silicone rubber mixing and forming, high-low temperature/O2 isolation, vacuum, granulation or molding production line for new special materials, multi-functional kneader like auto-weighting,shifting and green powder injection, granulation,forming etc, with dust collection. we focuses on R&D, manufacturing, selling and maintenance,moreover we have our own professional designers to meet your requirements.
- Company Name: LINA Machinery Industrial Co.,Ltd
- Representative: Kong Jin Wong
- Product/Service: Dispersion Kneader , Rubber Internal Mixer , Rubber Open Mill , Two Roll Mill , Plastic Granulator , Extrusion Pelletizer
- Capital (Million US $): 10,000,000RMB
- Year Established: 2002
- Total Annual Sales Volume (Million US $): US$5 Million - US$10 Million
- Export Percentage: 21% - 30%
- Total Annual Purchase Volume (Million US $): Below US$1 Million
- No. of Production Lines: 5
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: 8 Er Heng Road, ChiLing Industrial Zone, Donguan City, Guangdong Province, China
- Contact Person: Mr. Paul Wang
- Tel: 86--13380195885
Premium Related Products